A collaboration between Wyss Associate Faculty member, Dr Robert Wood and Robotics Engineer Hiroyuki Suzuki from the Sony Corporation has brought surgical robotics down to the microscale by creating a new, origami-inspired miniature remote centre of motion manipulator (mini-RCM). The robot is the size of a tennis ball, is light weight and successfully performed a difficult mock surgical task. A review of the technology, ‘Origami-inspired miniature manipulator for teleoperated microsurgery’ was published in Nature Machine Intelligence.
Traditional minimally invasive robotic laparoscopic surgery allows the surgical team to manipulate multiple tools at once with greater precision, flexibility and control than is possible with traditional techniques. However, these robotic systems are extremely large, often taking up an entire room and their tools can be much larger than the delicate tissues and structures on which they operate.
"The Wood lab's unique technical capabilities for making micro-robots have led to a number of impressive inventions over the last few years, and I was convinced that it also had the potential to make a breakthrough in the field of medical manipulators as well," said Suzuki, who began working with Wood on the mini-RCM in 2018 as part of a Harvard-Sony collaboration. "This project has been a great success."
To create their miniature surgical robot, Suzuki and Wood turned to the Pop-Up MEMS manufacturing technique developed in Wood's lab, in which materials are deposited on top of each other in layers that are bonded together, then laser-cut in a specific pattern that allows the desired three-dimensional shape to "pop up," as in a children's pop-up picture book. This technique greatly simplifies the mass-production of small, complex structures that would otherwise have to be painstakingly constructed by hand.
The team created a parallelogram shape to serve as the main structure of the robot, then fabricated three linear actuators (mini-LAs) to control the robot's movement: one parallel to the bottom of the parallelogram that raises and lowers it, one perpendicular to the parallelogram that rotates it, and one at the tip of the parallelogram that extends and retracts the tool in use. The result was a robot that is much smaller and lighter than other microsurgical devices previously developed in academia.
The mini-LAs are themselves marvels in miniature, built around a piezoelectric ceramic material that changes shape when an electrical field is applied. The shape change pushes the mini-LA's "runner unit" along its "rail unit" like a train on train tracks, and that linear motion is harnessed to move the robot. Because piezoelectric materials inherently deform as they change shape, the team also integrated LED-based optical sensors into the mini-LA to detect and correct any deviations from the desired movement, such as those caused by hand tremors.
To mimic the conditions of a teleoperated surgery, the team connected the mini-RCM to a Phantom Omni device, which manipulated the mini-RCM in response to the movements of a user's hand controlling a pen-like tool. Their first test evaluated a human's ability to trace a tiny square smaller than the tip of a ballpoint pen, looking through a microscope and either tracing it by hand, or tracing it using the mini-RCM. The mini-RCM tests dramatically improved user accuracy, reducing error by 68% compared to manual operation - an especially important quality given the precision required to repair small and delicate structures in the human body.
Given the mini-RCM's success on the tracing test, the researchers then created a mock version of retinal vein cannulation surgery, in which a surgeon must carefully insert a needle through the eye to inject therapeutics into the tiny veins at the back of the eyeball. They fabricated a silicone tube the same size as the retinal vein (about twice the thickness of a human hair), and successfully punctured it with a needle attached to the end of the mini-RCM without causing local damage or disruption.
In addition to its efficacy in performing delicate surgical manoeuvres, the mini-RCM's small size provides another important benefit: it is easy to set up and install and, in the case of a complication or electrical outage, the robot can be easily removed from a patient's body by hand.
"The Pop-Up MEMS method is proving to be a valuable approach in a number of areas that require small yet sophisticated machines, and it was very satisfying to know that it has the potential to improve the safety and efficiency of surgeries to make them even less invasive for patients," said Wood, who is also the Charles River Professor of Engineering and Applied Sciences at Harvard's John A Paulson School of Engineering and Applied Sciences (SEAS).
The researchers aim to increase the force of the robot's actuators to cover the maximum forces experienced during an operation, and improve its positioning precision. They are also investigating using a laser with a shorter pulse during the machining process, to improve the mini-LAs' sensing resolution.
"This unique collaboration between the Wood lab and Sony illustrates the benefits that can arise from combining the real-world focus of industry with the innovative spirit of academia, and we look forward to seeing the impact this work will have on surgical robotics in the near future," said Wyss Institute Founding Director, Dr Don Ingber, who is also the Judah Folkman Professor of Vascular Biology at Harvard Medical School and Boston Children's Hospital, and Professor of Bioengineering at SEAS.